Bently Nevada 149992-02 Relay Module 149992-02 16-Channel Failsafe Systems In Stock
December 11, 2024Bently Nevada 149992-02 Relay Module 149992-02 16-Channel Failsafe Systems In Stock
Description:
The 3500/33 16-Channel Relay Module is a full-height module
that provides 16 relay outputs. You can place any number of
16-channel relay modules in any of the slots to the right of the
Transient Data Interface (TDI) Module.
Each output of the 3500/33 16-Channel Relay Module can be
independently programmed to perform voting logic.
Each relay of the module includes Alarm Drive Logic.
Programming for the Alarm Drive Logic uses AND and OR logic
and may use the following:
l Alarming inputs (alert and danger statuses)
l Not-OK
l Individual Measured Variables from any monitor
channel or any combination of monitor channels in the
rack
You can program the Alarm Drive using the 3500 Rack
Configuration Software.
Physical | |
Main Module | |
Dimensions (height x width x depth) | 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in) |
Weight | 0.7 kg (1.6 lb) |
I/O Module | |
Dimensions (height x width x depth) | 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) |
Weight | 0.4 kg (1.0 lb) |
Rack Space Requirements | |
Main Module | 1 full-height front slot |
I/O Modules | 1 full-height rear slot |
Specifications Inputs | |
Power Consumption | 5.8 watts typical |
Front Panel LEDs | |
OK LED | Illuminated when the 3500/33 16-Channel Relay Module is operating properly. |
TX/RX LED | Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack. |
CH Alarm LED | Illuminated when Relay channel is in an alarm state. |
Relay Type | Single-pole Double-throw |
Relay Environmental Sealing | Epoxy-sealed |
Relay Arc Suppressor | 250 Vrms Installed as standard |
Relay Contact Life | 10,000 cycles |
Relay Operation | Four groups of four channels are switch selectable for Normally De-energized (ND) or Normally Energized (NE) operation. |
01 | 16-Channel Relay Output Module |
02 | 16-Channel Failsafe Relay Output Module |
03 | Low Current 16-Channel Relay Output Module |
04 | Low Current 16-Channel Failsafe Relay Output Module |
B: Hazardous Area Approval Option | |
00 | None |
01 | cNRTLus (Class 1, Division 2) |
02 | ATEX / IECEx / CSA (Class 1, Zone 2) |
Spares | |
149986-01 | Spare 16-Channel RelayControl Module |
149992-01 | Spare 16-Channel Relay Output Module |
149992-02 | Spare 16-Channel Failsafe Relay Output Module |
149992-03 | Spare 16-Channel Low Current Relay Output Module |
149992-04 | Spare 16-Channel Low Current Failsafe Relay Output Module |
Ordering Considerations:
l The 3500/33 16-Channel Relay Module requires the 3500 Rack Config, version 3.3 or later.
l The 3500/33 requires the 3500 Data Acquisition Software, version 2.40 or later.
lrequires the 3500 Data Display Software, version 1.40 or later.
l When ordered with the multiple approvals option (-02), the 3500 monitor is certified to Zone 2 standards, including ATEX and North American zones.
l The Zone 2 standards specify increased spacing requirements at higher voltages. The 3500/33 16-Channel Relay Module does not meet these spacing
requirements. Thus, the module ordered with the multiple approvals option is limited to a lower voltage than those with the other approvals options.
l Using higher voltages violates the hazardous area certificates associated with the multiple approvals option.
l The North American Division 2 standards
associated with the CSA-only approvals option (-01) have been de-rated to 30 Vrms to comply with 61010-1 type test requirements.
"l If the 3500/33 16-Channel Relay Module is part of a functional safety (SIL) system, the functional safety certificate requires the restricted voltage. Higher voltages
are not allowed for functional safety (SIL) systems."
More Bently Nevada Products for your choice:
330730-080-12-CN
330400-01-CN
330400-02-CN
330425-02-CN
190501-00-00-00-CN
330103-00-05-10-10-02-05
51199929-100
330930-045-00-05
TC-BATT01
330903-00-04-05-05-02-CN
330903-00-06-05-05-02-05
330703-000-050-10-11-05
3500/05-A01-B02-C01-D00- E01
330103-00-09-10-02-05
330173-00-09-10-02-05
330103-00-16-10-02-05
330103-00-11-10-02-05
330173-00-03-10-02-05
330103-00-14-10-02-05
330103-00-06-10-02-05
330103-00-03-10-02-05
330103-00-15-10-02-05
330103-00-04-10-02-05
330173-00-07-10-02-05
330173-00-02-10-02-05
330103-00-17-10-02-05
330173-00-06-10-02-05
3500/15-05-05-01
106M1079-01
106M1081-01
288055-01
146031-01
149369-01
125800-01
149986-01
149992-02
176449-01
125680-01
145988-02
172103-01
01-136180
133323-01
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.
Contact:
Latest News
- Honeywell 8C-TDILB1 Digital Input Sequence of Events 8C-TDILB1 S8 DI 24V IOTA (32) RED BLK Redundant Coated In Stock… December 26, 2024
- Honeywell 8C-TDILA1 Digital Input 8C-TDILA1 S8 DI 24V IOTA (32) BLK Non Redundant COATED In Stock… December 26, 2024
- Honeywell 8C-PDILA1 Digital Input 24VDC Coated 8C-PDILA1 S8 DI 24V IOM (32) In Stock… December 26, 2024
- Honeywell 8C-TAOXB1 Analog Output Module Redundant Coated 8C-TAOXA1 S8 AO IOTA (16) RED BLK In Stock… December 26, 2024
- Honeywell 8C-TAOXA1 Analog Output Module Non-Redundant Coated 8C-TAOXA1 S8 AO IOTA (16) BLK COATED In Stock… December 26, 2024
- Honeywell 8C-PAONA1 Analog Output Coated 8C-PAONA1 S8 AO Non-HART IOM (16) In Stock… December 26, 2024